Oil Bath Cold And Hot Chamber

Range of application：

Hot and cold impact test box is suitable for electronic elements of safety performance test screening tests provide reliability test, products, etc., at the same time, through this equipment test, can improve the reliability of products and product quality control.

Box structure：

1. Hot and cold impact test box all adopt computer control, is a self-developed software, has the good interface, the user's operation and monitoring is more simple and intuitive, maintain function will keep you running applications in the present condition, can temporarily change the program of numerical, time parameters can be set on the screen, the refrigeration, heating and blue transfer switch, according to the set value automatically.

2. Independent control of the cold box and hot box, the door of the box is independent of each other, and the scope of use of the test box is expanded (a case of three USES).

3. The product insulation effect can be fully guaranteed.

4. The test box door and the circulating fan, the blue transmission and other interlocks, protect the safety of the operator. Once the door is opened, the power supply of the circulating fan and the blue transmission will be automatically cut off.

 Technical parameters：

Model				CJX-2765W	CJX-6465W	CJX-12065W	CJX-20065W	CJX-30065W
Basket volume				27L	64L	120L	200L	300L
Performance parameters	Heating chamber		Exposure temperature range	+60℃～＋200℃
			Highest temperature	200℃（+200℃）
			Heating time	+20℃～＋200℃，20min
	Low temperature chamber		Exposure temperature range	0℃～-65℃
			Lowest temperature	-75℃
			Cooling time	+20℃～-75℃，40min
	Basket		Impact temperature	Low temperature -65℃～0; High temperature +60～+150℃
			Temperature fluctuation	≤±0.5℃
			Temperature deviation	≤±2℃
	Conversion time			≤10S
	Temperature recovery time			≤5min
	Load (aluminum ingots)(kg)			5	7	15	25	40
Box structure	Shell			Galvanized steel surface spray
	Liner			Stainless steel plate
	Insulation materials			Polyurethane foam sheet + ultrafine glass fiber
Cooling System	Compressor			Single compressor self-assembling refrigeration
	Refrigerant			R404a、R23 Mixed refrigerant
Heater				Nickel-chromium alloy heater
Basket lifting				Precision ball screw
Test hole				1个，φ50，Box top		1个，φ100，Box top
Temperature Sensor				Platinum resistance pt100
Controller				Siemens Smart PLC Controller\Touch screen
Data record				U plate
Communication method				RS485 interface  Modbus RTU protocol
Basket size (mm)		D		300	400	670	670		670
		W		300	400	470	570		770
		H		300	400	400	550		600
Body size (mm)		D		1750	1858	2150	2150		2200
		W		950	1050	1100	1200		1450
		H		1850	2000	2000	2300		2450
Installed power				15kw	19kw	24kw	28kw		45kw
Power				AC380V±10% 50Hz,3P5W
Standard accessories				1 product manual, 2 sample racks, 1 silicone rubber stopper
Fulfill the standard				GJB360.7、GB/T2423.22、MIL-STD-810F-503.4 GB/T2423.1.2、GB10592-2008、GJB150.3
Explanation:
Cooling water requirements：Water temperature +15～+28℃，Pressure difference between inlet and outlet 0.2～0.4Mpa，Clean.
Top ball screw lift height approx 300mm.