How To Choose The Screw Type Water-Cooled Chiller

Compared with the similar chillers, the screw type water-cooled chiller has many advantages. We as one of the top chiller manufacturersshare you more.

1. The temperature of the heat conducting liquid can be adjusted to any temperature you want, and it runs smoothly.

2. Using Aspera, Danfoss, Maneurop, Copland and other compressors of international famous brands, stable performance, able to work continuously. Compared with other similar equipment, product performance occupies the dominant position.

3. The design of screw type chiller is more humanized, flexible and convenient to use.

4. Though the microcomputer temperature controller, the temperature number on the equipment can be displayed, the adjustment unit is 0.1 degrees, the precision is quite high, the temperature range is of 5 degrees ~35 degree adjustable, in this temperature range you can adjust any temperature you want, if the temperature is out of range you can customize other refrigeration equipment.

5. Adopt hot gas bypass to save energy and improve control accuracy.

6. The use is more safe. Once the failure occurs, don't worry, there are a variety of fault alarms (over-temperature alarm, sensor alarm, high pressure alarm, compressor overheating alarm) to come to early warning.

7. It has a boot delay protection, so that you can use at ease.

8. All parts are safely grounded.

9. High performance circulating pump can ensure 24 hours of continuous operation.

Contact LNEYA for more dynamic temperature control equipments.

Knowledge Sharing Of Chiller Selection And Maintenance

Chillers can be used in a lot of industry, but who is the better low temperature chiller manufacturer in top chiller manufacturers?Let me tell you. The choice of own model and the maintenance are also very important. Next, see with me.

1. Range of temperature control

According to different temperature ranges, chillers are divided into standard chillers and low temperature chillers. The temperature range of the standard chiller is 3-35 degrees, and the temperature range of the low temperature chiller is 0-20 degrees.

2. Type selection

Industrial water chillers are mainly divided into water-cooled chillers and air-cooled chillers. Water cooled chillers need to be equipped with cooling towers, circulating pumps, and water towers are used for heat dissipation. The air-cooled chiller does not need any other equipment. It carries out heat exchange through its own fans and air.

3. Model selection

After determining the type of chiller, it is also necessary to choose the model. Because there are many specifications and models for each chiller. So when we install the chillers, we must carefully calculate the parameters such as refrigerating capacity and freezing water volume.

The methods of chiller maintenance ?

1. Compressor

Compressor is a key component in the unit. The quality of the compressor is directly related to the stability of the unit.

2. the cleaning of the condenser and evaporator

Because the cooling water of the water cooled condenser is an open loop circuit, the tap water commonly used is circulate through the cooling tower. When the content of calcium salt and magnesium salt in the water is large, it is easy to decompose and deposit on the cooling water pipe to form grime and affect heat transfer.

Contact LNEYA for more dynamic temperature control equipments.

The Application of Industrial Chillers

The chiller machine is needed in a lot of industries, basically chemical, medical, pharmaceutical industries are involved, then what industry can Wuxi Lneya chiller meet in the end? It is known that we are one of the top chiller manufacturers.

The cooling of the heating part of the semiconductor manufacturing device:

Cleaning and reprinting of single crystal, printing press, automatic holder installation device, spraying device, ion plating device, etching device, single crystal chip processing device, slicer, packaging machine, temperature management of developer, light device, heating device of magnetic field and so on.

Cooling of the heating part of the laser device:

Which industrial chiller manufacturer is better? Let me tell you that it should be the laser processing, the heating part of the welding machine, the laser marking device, the generator, the carbon dioxide laser processing machine, etc.

The cooling of the heating parts of other industries :

Plasma welding, automatic packaging machine, mold cooling, cleaning machinery, gold plating tank, precision grinding machine, injection molding machine, molding parts of resin molding machine, etc.

Analyze the cooling of the heating part of the machine:

The light source of the electron microscope, the light source part of the ICP luminescent spectrophotometer, the heating part of the spectrophotometer, the heat source of the X-ray analysis device, the heating part of the automatic pulse bar, the light source of the atomic absorption photometer, etc.

Cooling of the cooling medium of CNC machine tools and machining centers.

In these aspects, we should remind you that after finishing using the chiller, all the devices should be closed, the power plug should be pulled out, and the chiller should be cleaned up.


Contact LNEYA for more dynamic temperature control equipments.